Environmentally Friendly Small Smelting Furnace For Small Rare
Metal Melting
Small rare metal melting furnace introduction:
There are many metal melting furnaces, mainly related to the volume
of the melting furnace, which is referred to as the number of
kilometers of melting. For example, the type of 5Kg*10Kg*20Kg*30Kg,
etc, are abbreviated as small metal melting furnace; main melting
object: gold, silver, copper, iron, aluminum and alloy, etc.,
generally have a melting point of 1500-1800 °, and the heating
method used for melting is mostly an induction power supply.
Large-scale steelmaking furnaces are also a kind of melting
furnaces, mainly in the amount of melting. For more information
about other melting furnaces and small metal melting furnace ,
please call or contact us. We are at your service!
The working principle of the equipment: the steel workpiece is
placed in an inductor made of a copper tube to pass an alternating
current to generate an alternating magnetic field. Due to
electromagnetic induction, the induction current in the workpiece
will be generated in the same frequency as the current in the
inductor, but in the opposite direction -- eddy current. Due to the
skin effect, the distribution of eddy currents in the cross section
of the workpiece is not uniform, and the higher the current density
of the surface, the smaller the current density at the center. The
higher the frequency of the alternating current, the more
pronounced the skin effect, the shallower the depth of the
induction heating, and the resistance heat generated by the eddy
current concentrated on the surface layer of the workpiece
according to the Joule-Electrical Law due to the resistance of the
workpiece itself. (Brief: The eddy current is generated by the
magnetic field to convert the electric energy into heat energy, so
as to achieve induction heating, then the heating purpose can be
achieved.)
| Product name | Small Melting Furnace LSW-110 KW |
| Power | 110KW | Output current | 160A |
| Output voltage | 70-550V | Input voltage | 3-phase 380V 50-60HZ |
| Oscillation frequency | 1-20KHz | Connecting wire | 90mm² |
| Control switch | 3-phase 225A | Ground wire | 2mm² |
| Cooling water pressure | ≥0.2Mpa | Cooling water flow | ≥20L/min |
| Smelting capacity |
| Steel and stainless steel | Copper, gold, silver | Aluminum and aluminum alloy |
| 50kg | 150kg | 50kg |
Manufacturer and equipment advantages:
1. The melting speed is fast, the solution temperature is uniform,
the oxidation combustion is less, and the composition is uniform.
2, small size, small footprint, can be continuously smelted in 24
hours
3, the smelting directly melts, the solution can be completely
emptied, and the replacement of the product is convenient.
4, the operation is simple, the environment is good, the transfer
is convenient, can be started 100%.
5. The furnace lining has a long service life and the product has
high reliability.
6, electromagnetic stirring effect, favorable composition and slag.
7. Use IGBT core components to significantly reduce power loss.
8. Green, environmentally friendly, non-polluting, and reduce labor
intensity.
9. The device panel has a signal output terminal, which can realize
one-button operation.
10-15 years of brand protection, 24 hours after the sale can be
called at any time.
11. The internal components of the equipment adopt well-known
domestic and foreign manufacturers to ensure the stability of the
whole machine.
Equipment parameters:
WCT series aluminum melting equipment (700 ° C)
| Model | WCT-50-60 | WCT-75-70 | WCT-200-100 | WCT-300-160 |
| Rated capacity (KG) |
50
|
75
|
200
|
300
|
| Maximum power(KW) |
60
|
70
|
100
|
160
|
| Maximum melting rate (KG/H) |
150
|
180
|
250
|
400
|
| Matching power consumption (KWH/T) |
360
|
350
|
345
|
340
|
| The shortest melting time(H) |
0.33
|
0.42
|
0.80
|
0.75
|
WCT series copper melting equipment (1200 ° C)
| Model | WCT-150-70 | WCT-220-100 | WCT-600-200 | WCT-750-300 |
| Rated capacity(KG) | 150 | 220 | 600 | 750 |
| Maximum power(KW) | 70 | 100 | 200 | 300 |
| Maximum melting rate (KG/H) | 210 | 320 | 625 | 920 |
| Matching power consumption (KWH/T) | 305 | 300 | 295 | 290 |
| The shortest melting time(H) | 0.71 | 0.69 | 0.96 | 0.82 |
Pledge
1. Provide complete equipment and related materials on time and in
quality;
2. Lifetime preferential technical service after the expiration of
the warranty period.
3. Free training of equipment operation and maintenance personnel
for buyers
4. Responsible for on-site debugging; responsible for simple
packaging of equipment; equipment warranty period of one year;
5. Provide the user with the plane layout of the equipment and the
corresponding pipeline connection diagram, the consumable parts
diagram and the operation manual;
.
